Sepha BottleScan Non-Destructive Bottle Integrity Tester

The Sepha BottleScan is a tool-less, non-destructive integrity tester for induction sealed pharmaceutical bottles. It has a unique ability to test 4 bottles per test cycle. The BobbleScan incorporates force decay technology to offer a superior QA/QC check as part of cGMP. The principle of operation is similar to the Sepha PakScan or MediScan. Under a vacuum, the induction seal on a properly sealed bottle will expand. The Sepha BottleScan detects the force applied on a load cell from this expansion. If the force does not increase when the bottle is under a vacuum, it means the bottle has a leak.

Other Features of BottleScan:

  • Non-destructive inspection device
  • Tool-less set up
  • Ideal for lines with multiple products
  • Quick, repeatable test with objective pass/fail result
  • Tests up to 4 bottles per test cycle
  • Detects defects  down to 15 microns
  • Stores up to 30,000 product types
  • Configurable methods allows you to decide machine sensitivity
  • Reduces waste and increases efficiency
  • Simple to use


Semi automatic
Test Cycle Time
30-90 seconds
Down to 15 microns
Bottle Dimensions
30mm(W) x 60mm (H) x to 100mm(W) x 150mm(H) (without cap)
DVD/CD-ROM drive Ethernet 2 x USB
Power Supplies
Electrical: 110/230V AV Single Phase Air: 6 Bar
User Interfaces
17″ 1280 x 1024 SXGA TFT display with resistive touch screem
Audit Compliance
Machine can be used as part of a 21-CFR Part 11 system
Stainless Steel (Grade 304)
Machine Dimensions
746 (W) x 600 (L) x 810 (H) mm (29″ x 24″ x 32″)
Machine Weight
125kg (275lb) / Shipping Weight 260kg (573lb)
Supplied with a 12 month warranty. (Service Level Agreements are available for additional support).


Complete the form below to download a PDF copy of the Sepha Bottlescan Brochure

Your Name (required)

Company Name (required)

Location (required)

Your Email (required)


Enter the above code (required)