Sepha VisionScan

Sepha VisionScan – tool-less & non-destructive pharmaceutical blister pack leak tester

“The Sepha VisionScan is a tool-less, non-destructive leak detection device for pharmaceutical blister packs.”

The Sepha VisionScan non-destructive leak tester is the new alternative to blue dye bath tests which destroy the pack being tested by submerging it in water. Using the latest in camera technology, the VisionScan non-destructive leak tester offers modern pharmaceutical manufacturers a flexible, reliable, objective and cost saving alternative to destructive blister pack test methods such as blue dye. The software gives a clear result for each blister package and even shows you which cavity had the leak. The pack being tested is not damaged. Good tablets can be put back on the line. The cost savings from selling these packs can be significant.

Finally, there is a VALIDATABLE system for blister pack leak testing. If you are ready to leverage today’s technology, give us a call and we will set up a demonstration for you.

TECHNICAL SPECIFICATIONS

Operation
Semi-automatic
Construction
Anodized Aluminum and Abs/Acrylic
Test area
210 mm x 165 mm (8.3″ x 6.5″)
Measurement range
Detects defects as small as 7 micron depending on the pack
Test Time
Down to 10 seconds for micron holes and as low as 6 seconds for gross holes
Machine size
455 mm (W) x 440 mm (D) x 520 mm (H)
(17.9″ x 17.3″ x 20.5″)
Interface
12″ WXGA TFT display, 1280 x 800 pixel resistive touch screen
Hardware
2 x USB ports, 1 x Ethernet port
Audit compliance
21 CFR part 11 compliant
Machine weight
40 kg
Shipping weight
80 kg

VISIONSCAN FEATURES:

  • Non destructive seal and leak detection device for blister packs
  • High resolution imaging technology detects cavity defects, including channel leaks and weak seals, down to 7 micron
  • Objective, repeatable pack test for each product
  • Easy to use
  • Tool-less. Ideal for lines with multiple products
  • Touch screen control
  • Can test multiple packs per test cycle
  • Rapid test down to 10 seconds for micron holes and 6 seconds for gross holes
  • Operating system can store unlimited product types
  • Stores and exports data for quality control
  • Storage of results
  • 21 CFR part 11 compliant
  • Validation package available
  • Flexible, table top design
  • Active Directory and flexible reporting built in

Brochure-download

Complete the form below to download a PDF copy of the Sepha Visionscan Brochure

Your Name (required)

Company Name (required)

Location (required)

Your Email (required)

captcha

Enter the above code (required)